G0443 1-1/2 HP Cyclone Dust Collector
|
|
|
|
Description
Cyclonic action separates the heavy dust particles from the fine particles & drops them into the 35-gallon steel drum. The fine dust travels past the 12-1/2" diameter impeller and is then trapped by a cartridge filter made of spun-bond polyester that filters 99.9% of particles from 0.2 to 2 microns in size. The cartridge filter is pleated to provide 96 square feet of surface area for efficient air movement and a clear plastic bag collects the fine cake that shakes off the filter for consistent dust collector performance. Casters mounted to the drum also make disposal of the larger chips & dust as easy as it gets. Other features include: a vertical motor support for reduced vibration, thick walled 11GA steel blower housing, 16GA steel cyclone body, 360° blower rotation for easy connection to a duct system & a TEFC Class "F" motor. The optional steel legs & support frame(H7508) makes setup quick & easySPECIFICATIONS:
- Intake hole size: 6"
- Bag material: Plastic
- Impeller size: 12-1/2" steel, riveted
- Suction capacity: 1025 CFM @ 2.6" SP
- Maximum static pressure (inches of water): 10.3"
- Filter: 99.9% efficiency captures 0.2-2 micron dust particles
- Filter surface area: 96 sq ft
- Collection Drum: 35 gallons
- Overall dimensions: 55-1/2" wide x 36-1/4" deep x 87-1/2"" high
- Motor: TEFC Class "F", 1-1/2 HP, single-phase, 110/220V pre-wired 110V
- Amps: 18.8/9.4
- Cycle/RPM: 60 Hertz/3450 RPM
- Switch: On/Off push button magnetic switch w/remote control devise
- Approximate shipping weight: 313 lbs.
 See page 174 of our 2010 Grizzly Catalog! |
* Freight cost not applicable to orders shipping outside the contiguous 48 states. Freight cost includes a $5.00 fuel surcharge.
** Final prices will include state sales tax for items shipped to WA, MO, or PA. Shipping charges for items not shipped via truck freight will be added according to our
shipping rates.